Commit 95cb1465 authored by Nicolas Ferre's avatar Nicolas Ferre Committed by Peter Korsgaard
Browse files

configs/atmel: addition of the sama5d27 som1 ek board



Add the new SAMA5D27 SOM1 Evaluation Kit with linux4sam_5.7 components.
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: default avatarPeter Korsgaard <peter@korsgaard.com>
parent c1502e83
# Image for SD card boot on Atmel SAMA5D2 Xplained boards
#
image boot.vfat {
vfat {
files = {
"zImage",
"at91-sama5d27_som1_ek.dtb",
"at91-sama5d27_som1_ek_pda4.dtb",
"at91-sama5d27_som1_ek_pda7.dtb",
"at91-sama5d27_som1_ek_pda7b.dtb",
"boot.bin",
"u-boot.bin"
}
}
size = 16M
}
image sdcard.img {
hdimage {
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
offset = 1M
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
size = 512M
}
}
#!/bin/sh
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAGE_CFG}"
BR2_arm=y
BR2_cortex_a5=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PTHREAD_DEBUG=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/atmel/sama5d27_som1_ek_mmc/post-image.sh"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux4sam_5.7"
BR2_LINUX_KERNEL_DEFCONFIG="sama5"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d27_som1_ek at91-sama5d27_som1_ek_pda4 at91-sama5d27_som1_ek_pda7 at91-sama5d27_som1_ek_pda7b"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
BR2_PACKAGE_ALSA_UTILS_APLAY=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_SWSCALE=y
BR2_PACKAGE_MPG123=y
BR2_PACKAGE_BZIP2=y
BR2_PACKAGE_GZIP=y
BR2_PACKAGE_UNZIP=y
BR2_PACKAGE_XZ=y
BR2_PACKAGE_ZIP=y
BR2_PACKAGE_GDB=y
BR2_PACKAGE_LMBENCH=y
BR2_PACKAGE_DOSFSTOOLS=y
BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y
BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y
BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
BR2_PACKAGE_MMC_UTILS=y
BR2_PACKAGE_MTD=y
BR2_PACKAGE_WILC1000_FIRMWARE=y
BR2_PACKAGE_DEVMEM2=y
BR2_PACKAGE_EVTEST=y
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_SETSERIAL=y
BR2_PACKAGE_SPI_TOOLS=y
BR2_PACKAGE_USBUTILS=y
BR2_PACKAGE_LIBDRM=y
BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
BR2_PACKAGE_DTC=y
BR2_PACKAGE_DTC_PROGRAMS=y
BR2_PACKAGE_BLUEZ_UTILS=y
BR2_PACKAGE_BRIDGE_UTILS=y
BR2_PACKAGE_CAN_UTILS=y
BR2_PACKAGE_DROPBEAR=y
BR2_PACKAGE_ETHTOOL=y
BR2_PACKAGE_IPERF=y
BR2_PACKAGE_IPROUTE2=y
BR2_PACKAGE_IPTABLES=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_LRZSZ=y
BR2_PACKAGE_MII_DIAG=y
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_WGET=y
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_BASH=y
BR2_PACKAGE_HTOP=y
BR2_PACKAGE_VIM=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.9"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_som1_eksd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.7"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d27_som1_ek_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment