Commit c6473f8e authored by Jagan Teki's avatar Jagan Teki Committed by Thomas Petazzoni
Browse files

board: Add support for Engicam i.CoreM6 DualLite/Solo boards



Add initial support for Engicam i.CoreM6 DualLite/Solo board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot

U-Boot 2017.07-rc1 has common u-boot defconfig for All i.CoreM6
variant boards, so this patch update the same along with
buildroot defconfig that reflect the common name.
Signed-off-by: default avatarJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
parent 6186f015
......@@ -89,7 +89,7 @@ ci20_defconfig: *defconfig
ci40_defconfig: *defconfig
csky_gx6605s_defconfig: *defconfig
cubieboard2_defconfig: *defconfig
engicam_imx6q_icore_defconfig: *defconfig
engicam_imx6qdl_icore_defconfig: *defconfig
firefly_rk3288_defconfig: *defconfig
firefly_rk3288_demo_defconfig: *defconfig
freescale_imx28evk_defconfig: *defconfig
......
......@@ -843,7 +843,7 @@ F: package/keepalived/
N: Jagan Teki <jagan@amarulasolutions.com>
F: board/engicam/
F: configs/engicam_imx6q_icore_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
N: James Knight <james.knight@rockwellcollins.com>
F: package/atkmm/
......
......@@ -2,10 +2,11 @@ image boot.vfat {
vfat {
files = {
"uImage",
"imx6dl-icore.dtb",
"imx6q-icore.dtb"
}
}
size = 16M
size = 64M
}
image sdcard.img {
......
......@@ -5,7 +5,7 @@ Buildroot for Engicam i.MX6 SOM platforms:
This file documents the Buildroot support for all Engicam i.MX6 SOM
platform boards.
i.CoreM6 Quad/Dual SOM Starter kits:
i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits:
https://www.engicam.com/vis-prod/101120
This configuration uses U-Boot mainline and kernel mainline.
......@@ -17,7 +17,7 @@ First, configure Buildroot for the Engicam i.MX SOM's:
- for i.CoreM6 Quad/Dual:
make engicam_imx6q_icore_defconfig
make engicam_imx6qdl_icore_defconfig
Build all components:
......@@ -26,6 +26,8 @@ Build all components:
You will find the following files in output/images/:
- for i.CoreM6 Quad/Dual:
- imx6q-icore.dtb
- for i.CoreM6 DualLite/Solo:
- imx6dl-icore.dtb
- rootfs.ext4
- rootfs.tar
- sdcard.img
......@@ -46,6 +48,7 @@ directory, ready to be dumped on a SD card. Launch the following
command as root:
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
sync
*** WARNING! This will destroy all the card content. Use with care! ***
......
......@@ -14,8 +14,8 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.05"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6q_icore_mmc"
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
......@@ -25,15 +25,15 @@ BR2_TARGET_UBOOT_SPL_NAME="SPL"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11"
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5"
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
BR2_LINUX_KERNEL_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-icore"
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore"
# Filesystem
BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual Starter Kit"
BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo Starter Kit"
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_PACKAGE_HOST_GENIMAGE=y
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment