- 05 Mar, 2017 40 commits
-
-
Jörg Krause authored
The board support package includes the following components: - U-Boot 2016.11 - Linux 4.9.3 - packages: - alsa-utils for basic audio usage of the on-board headphone jack and microphone - iw and wpa_supplicant for managing the wireless interface Two Linux patches are necessary to enable audio and wifi support. Both patches are fetched from the Linux next branch and are probably mainlined in Linux 4.11. A Linux configuration fragment enables the wireless device driver, which is not enabled by default in the mainline defconfig of the board. The wifi chip needs a NVRAM configuration file which is provided in the rootfs overlay. Signed-off-by:
Jörg Krause <joerg.krause@embedded.rocks> [Thomas: remove e2fsprogs from the target packages, add entry in DEVELOPERS file, remove C++ support.] Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Fabio Estevam authored
Add support for kmscube application, which is helpful for testing kms/drm drivers. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Tested-by:
Jagan Teki <jagan@amarulasolutions.com>
-
Ignacy Gawędzki authored
Include the --disable-dependency-tracking option in <pkg>_CONFIGURE_CMDS only on the condition that <pkg>_OVERRIDE_SRCDIR is empty. Dependency tracking is very welcome while developing in order to properly rebuild when calling make <pkg>-rebuild for instance. Signed-off-by:
Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
-
Adam Duskett authored
Signed-off-by:
Adam Duskett <aduskett@codeblue.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Adam Duskett authored
Signed-off-by:
Adam Duskett <aduskett@codeblue.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Lionel Flandrin authored
On older SoCFPGA SoCs, there was not enough SRAM to fit the entire U-Boot, so a SPL model was used. The SPL was therefore the binary that had to be "prepared" to be loaded by the ROM code using the mkpimage tool. With newer SoCFPGA SoCs, there is enough SRAM to fit the entire U-Boot, and therefore the ROM code directly loads U-Boot. In this case, it's the real U-Boot image (not the SPL) that needs to be prepared using mkpimage. This code adds support for the newer SoCFPGA SoCs, by adjusting the mkpimage related logic to apply on the SPL if an SPL is enabled, or on the full U-Boot image otherwise. Signed-off-by:
Lionel Flandrin <lionel@svkt.org> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Lionel Flandrin authored
Signed-off-by:
Lionel Flandrin <lionel@svkt.org> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
The buildroot repository is now mirrored on https://gitlab.com/buildroot.org/buildroot so we can use Gitlab-CI to test Buildroot. Gitlab-CI is controlled by a .gitlab-ci.yml file that exists in the repository. For now, the only test is building all defconfigs (inspired on https://travis-ci.org/buildroot/buildroot-defconfig-testing/ ). Since all the defconfigs have to be specified in the .gitlab-ci.yml file, we generate the file based on .gitlab-ci.yml.in. The generated .gitlab-ci.yml file has to be committed into the repository, though, otherwise Gitlab-CI doesn't see it. So there is also a test to verify that .gitlab-ci.yml is up-to-date. Building all the defconfigs takes a long time. Gitlab-CI will do that every time it pulls from git.buildroot.org, which is once per hour. That is way too often. Therefore, the defconfigs are not built on pull, but only on explicit trigger through the API or when a tag is added. Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> [Thomas: - fix typo not -> no - add LC_ALL=C when calling 'ls -1' to get a predictable order of the defconfigs - regenerate .gitlab-ci.yml.] Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Carlos Santos authored
GTest version 1.8.0 includes gmock so merge both packages inside gtest In this merge: - Add gmock as a suboption of gtest (BR2_PACKAGE_GTEST_GMOCK) following advice from Arnout Vandecappelle - Add BR2_PACKAGE_GMOCK as a legacy entry, selecting BR2_PACKAGE_GTEST and BR2_PACKAGE_GTEST_GMOCK. - Use cmake to install libraries and headers and add missing files (gtest.pc, gtest-config, gmock.pc) in GTEST_POST_INSTALL_STAGING_HOOKS instead of redefining GTEST_INSTALL_STAGING_CMDS - Remove patch on Python as gmock/gtest now supports python 3.0 (commit 456fc2b5c4e9ebf05a5987dfe1ff0ac9ffeb53cc) - Add the correct license in HOST_GTEST_LICENSE as all python code in googlemock/scripts/generator is licensed under Apache-2.0 and not BSD-3c - Fix URL of gtest project in Config.in - Remove the gmock entry from DEVELOPERS - Install gmock_gen directly, instead of as a symlink to gmock_gen.py Notice that any external package that depends on gmock will cause an immediate build termination because make doesn't know how to build gmock. Since the user has just removed gmock from the legacy menu, it should be quite obvious what needs to be done. Signed-off-by:
Fabrice Fontaine <fabrice.fontaine@orange.com> Signed-off-by:
Carlos Santos <casantos@datacom.ind.br> Reviewed-by:
Romain Naour <romain.naour@gmail.com> [Thomas: - Use += instead of = when assigning a value to <pkg>_DEPENDENCIES in conditional - Remove comment about the "tricky logic" around BUILD_GTEST and BUILD_GMOCK - Move GTEST_GMOCK_INSTALL_MISSING_FILE inside the ($(BR2_PACKAGE_GTEST_GMOCK),y) condition.] Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
Many packages install documentation under /usr/share/lua/.../doc. Add a TARGET_FINALIZE_HOOK to remove it. Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
The infra sets _SUBDIR to the correct value, so we can use it to define _LICENSE_FILES. This removes the need for LUA_CJSON_VERSION_UPSTREAM. Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
LuaRocks has a policy that the rockspec and rock filenames are lower case. However, the upstream name may contain uppercase characters. We have several packages like that in Buildroot. To simplify the package .mk files, apply the lowercase from within the infra. Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Rodrigo Rebello authored
Also remove patches that have been merged upstream. Signed-off-by:
Rodrigo Rebello <rprebello@gmail.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Thomas Petazzoni authored
This commit backports two upstream patches in lttng-libust, that fix the build with the musl C library. Fixes: http://autobuild.buildroot.net/results/8bbcac9f9debf76cd1f56734bfd494677f2acd21/ Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
These defconfigs have been broken due to gcc5 for more than half a year, and nobody stepped up to fix it. In addition, the rocketboards git repository used by these defconfigs hasn't been reachable for more than half a year. Finally, these defconfigs don't even use the BR2_TARGET_UBOOT_ALTERA_SOCFPGA_IMAGE_CRC option so they are not a great example for this family of targets. Remove these defconfigs, as well as the board directory. Both are removed in a single commit to avoid having an inconsistent readme. Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Cc: Jan Viktorin <viktorin@rehivetech.com> Cc: Charles Manning <cdhmanning@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
This defconfig has been broken due to gcc5 for more than half a year, and nobody stepped up to fix it. Remove it, as well as it board directory. Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Cc: Gergely Imreh <imrehg@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
The scripts used for the minnowboards were generic for MinnowBoard and MinnowBoard MAX. Since we removed the original MinnowBoard, this isn't necessary anymore. Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Arnout Vandecappelle authored
This defconfig has been broken due to gcc5 for more than half a year, and nobody stepped up to fix it. Remove it, as well as the files it references. Update the readme to remove references to MinnowBoard. Signed-off-by:
Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Christian Kellermann authored
Adds the python binding for libftdi to buildroot. Signed-off-by:
Christian Kellermann <christian.kellermann@solectrix.de> Reviewed-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Thomas Petazzoni authored
The version of the khrplatform.h header bundled with odroid-mali has a definition of the khronos_intptr_t and khronos_ssize_t that doesn't match the official Khronos registry headers or the Mesa3D headers. Due to this, it causes conflicts with some packages that redefines those types (with the correct definitions), such as libepoxy. Issue reported upstream at: https://github.com/mdrjr/c2_mali/issues/1 Since nobody bothered fixing the issue even though it has been happening since July 2016 (first build failure at http://autobuild.buildroot.net/results/ed8d562ae5fdb472a83f9a07b2f755c80c972c34/), let's mark this package as BROKEN. Fixes: http://autobuild.buildroot.net/results/ca48bb6291ca16e410edb83b5cdeb24847b6eaee/ Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
"Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Thomas Petazzoni authored
Building sngrep with OpenSSL support in static linking configurations currently fails due to undefined symbols in the OpenSSL library. It's the usual problem with using AC_CHECK_LIB() to discover libraries instead of the pkg-config based PKG_CHECK_MODULES(). Therefore, this commit introduces a patch that switches to using pkg-config to discover OpenSSL. A preliminary patch is needed, without which appending to LIBS/CFLAGS doesn't work. Both patches have been submitted upstream. Fixes: http://autobuild.buildroot.net/results/911143de823b2c749ac0a59dfa06adb6ddd3de50/ Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
"Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Thomas Petazzoni authored
Even though x264 doesn't use an autoconf generated configure script (and hence doesn't use the autotools-package infrastructure), it uses config.guess and config.sub. The ones bundled in x264 are too old to know about the OpenRISC architecture, so this commit leverages the UPDATE_CONFIG_HOOK from the autotools-package infrastructure to update config.sub and config.guess. Fixes: http://autobuild.buildroot.net/results/b458c2dff0ecde61248f058092c6eeaa75039cfb Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Yann E. MORIN authored
Currently, we tell cmake where to look for our own custom platform description by passing the path to the moduls directory on the command line. However, this causes two different problems. First, some packages simply set CMAKE_MODULE_PATH in their CMakeList.txt, thus overriding our own path, and then our platform description is not found. Second, cmake may internally call sub-cmake (e.g. in the try_compile macro), but the CMAKE_MODULE_PATH is not automatically passed down in this case. For the first problem, we could hunt down and fix all offenders, but this is an endless endeavour, especially since packagers are told to do so on the cmake wiki [0]: CMAKE_MODULE_PATH tell CMake to search first in directories listed in CMAKE_MODULE_PATH when you use FIND_PACKAGE() or INCLUDE() SET(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/MyCMakeScripts) FIND_PACKAGE(HelloWorld) The second problem could be solved by passing yet another variable on the command line, that tells cmake to explicitly pass arbitrary variables down to sub-cmake calls: -DCMAKE_TRY_COMPILE_PLATFORM_VARIABLES=CMAKE_MODULE_PATH However, this only covers the case of try_compile. Even though no other case is known yet, we'd still risk missing locations where we would need to propagate CMAKE_MODULE_PATH, even some where we'd have no solution like for try_compile. Instead, ngladitz on IRC suggested that CMAKE_MODULE_PATH be set directly from the toolchain file. And indeed this fixes both problems explained above. So be it. [0] https://cmake.org/Wiki/CMake_Useful_Variables Signed-off-by:
"Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Samuel Martin <s.martin49@gmail.com> Cc: Jörg Krause <joerg.krause@embedded.rocks> Cc: Ben Boeckel <mathstuf@gmail.com> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: Peter Korsgaard <peter@korsgaard.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Kurt Van Dijck authored
Mosquitto combined with version 2.1.0 of libwebsockets yields a failing system. Version 2.1.1 restores the websocket interface again. Signed-off-by:
Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Thomas Petazzoni authored
cryptsetup installs a library and a header file, so it makes sense to install it to staging. Fixes bug #9691. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Yann E. MORIN <yann.morin.1998@free.fr>
-
Baruch Siach authored
Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Baruch Siach authored
Since commit 0552a367 ("Remove --{enable, disable}-debug configure flags.") we do not pass --enable-debug to configure script. The patch to remove -Werror in this case is thus no longer needed. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Martin Bark authored
Signed-off-by:
Martin Bark <martin@barkynet.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Martin Bark authored
Signed-off-by:
Martin Bark <martin@barkynet.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Martin Bark authored
Signed-off-by:
Martin Bark <martin@barkynet.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Martin Bark authored
Signed-off-by:
Martin Bark <martin@barkynet.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Martin Bark authored
Signed-off-by:
Martin Bark <martin@barkynet.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Martin Bark authored
Signed-off-by:
Martin Bark <martin@barkynet.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Martin Bark authored
Signed-off-by:
Martin Bark <martin@barkynet.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Martin Bark authored
Signed-off-by:
Martin Bark <martin@barkynet.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Bernd Kuhls authored
Changed _SITE according to URL mentioned in upstream release note. Signed-off-by:
Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Bernd Kuhls authored
Removed patch applied upstream: https://cgit.freedesktop.org/xorg/app/sessreg/commit/?id=93f5d5abf6b214a4b36e00cd09174d24b2ed0a6d Renumbered remaining patch. Changed _SITE according to URL mentioned in upstream release note. Signed-off-by:
Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-